Contract Events

Contract events are transactions/ changes performed at the contract level. Such events are disbursements, early repayments, transfers of funds between the customer's accounts and so on.

In a contract based on a specific banking product, you can only add events with the transaction types predefined at that banking product level. Other changes may be performed by versioning the contract. This page covers those changes enabled via events, created via the Insert button above the Transactions section in the Contract > Payments tab.

Event Statuses

An event record has the following statuses, visible in the top left corner of the Event page:

• Draft - the status of a newly created event record that was not yet sent for approval. The event value is not applied to the contract while the event is still in this status. While in this status, you can edit some fields. Approve after editing all the necessary details.

• Approved - the status of an event record after being authorized. The event value is applied to the contract and you cannot edit any of the event's details. There is no further transition from this status.

• Cancelled - the status of an event record after being cancelled. The event value is not applied to the contract and you cannot edit any of the event's details. There is no further transition from this status.

Adding Events To Approved Contracts

In order to add events to a contract, follow these steps:

1. In FintechOS Portal, in the Contracts List page, select a contract with Approved status.

2. Double-click the contract to open it for editing.

3. Navigate to the contract's Payments tab.

4. Click the Insert button above the Transactions section. The Event page is displayed.

   

5. Fill in the following fields, noting that the fields that are not mandatory, are read-only:
   

Field	Mandatory	Data Type	Details
Contract	No	Lookup	Automatically completed with the selected contract's number. You cannot edit this field.
Customer	No	Lookup	Automatically completed with the selected contract's customer. You cannot edit this field.
Currency	No	Lookup	Automatically completed with the selected contract's currency. You cannot edit this field.
Event Date	No	Invariant Date	Automatically completed with the Core Banking system's current date. You cannot edit this field.
Event Value	Yes	Numeric	Enter the value of the transaction. If you've already selected the transaction type, the other value fields are automatically calculated and their values are displayed. For some transaction types, the event value is calculated and displayed after saving the record, based on the information filled in a series of other fields.
Transaction Type	Yes	Lookup	Select from the list the transaction type. Only the transaction types associated with the banking product which is at the base of the contract are displayed. Read here more information about transaction types. NOTE Depending on the selected transaction type, a series of new fields are displayed that require to be filled in.
Top up Account transaction type
Source Bank Account Balance	Yes	Numeric	This field displays the available balance of the account associated with the contract. You cannot edit this field.
Source Account	Yes	Text	Insert the source of the respective amount.
Transfer between my bank accounts transaction type
Source Bank Account Balance	Yes	Numeric	This field displays the available balance of the account associated with the contract. You cannot edit this field.
Destination Account	Yes	Lookup	Select the destination account from the list of accounts that belong to the contract's customer.
Withdraw transaction type
Source Bank Account Balance	Yes	Numeric	This field displays the available balance of the account associated with the contract. You cannot edit this field.
Destination Account	Yes	Lookup	Select the destination account from the list of accounts that belong to the contract's customer.
Disbursement transaction type
Financed Amount	No	Numeric	This field displays the contract's financed amount. You cannot edit this field.
Available Value	No	Numeric	This field displays the amount still available within the contract. You cannot edit this field.
Repayment Due Day	No	Whole Number	This field displays the day of the month when the repayment is due, if it was specified previously. You cannot edit this field.
Installment Method	Yes	Lookup	This field displays the contract's selected installment method. You cannot edit this field.
Tenor	No	Whole Number	This field displays the duration left in the contract. You cannot edit this field.
Principal Value	Yes	Numeric	This field displays the value affecting the principal of the contract. You can modify this value.
Installment Value	Yes	Numeric	This field displays the installment value calculated for the entered event value. You can modify this value.
Early Repayment transaction type Only for contracts that have an approved disbursement event. Note that when an approved early repayment event covers a contract's entire outstanding amount resulting in zero amounts on the contract, that contract is automatically closed by Core Banking.
Charge Fee	No	Lookup	This field displays the transaction fee applicable for a repayment transaction. See Transaction Fees for more details. You cannot edit this field.
Repayment Fee Percent	No	Lookup	This field displays the repayment fee percentage applicable for the contract. Depending on the ManualRepaymentFee Core Banking system parameter's value, the system may allow you to change the percentage. See Transaction Fees for more details.
Fee For Repayment	No	Lookup	This field displays the repayment fee value applicable for the contract. Depending on the ManualRepaymentFee Core Banking system parameter's value, the system may allow you to change the value. See Transaction Fees for more details.
Remaining Principal At Date	Yes	Numeric	This field displays the remaining value of the principal at the current date. You can modify this value.
Keep Contract Period	Yes	Bool	This field displays whether the system should keep the period of the contract (if the checkbox is selected) or recalculate it. You can modify this value.
Repayment Principal Amount	Yes	Numeric	This field displays the principal amount to be repaid with this event. You can modify this value.
Interest Value	Yes	Numeric	This field displays the interest value applicable to the payment. You cannot edit this field.
Other Fees Total Value	Yes	Numeric	This field displays other fees and commissions applicable to the payment. You cannot edit this field.
Future Installments No	Yes	Whole Number	This field displays the number of installments to be paid in the future. You cannot edit this field.
Future Principal For Installment	Yes	Numeric	This field displays the future value of the principal as recalculated after this payment. You cannot edit this field.
Unpaid Amount On Contract	No	Numeric	This field is displayed after saving the record. It shows the value of the unpaid amount still on the contract. You cannot edit this field.
Unpaid Amount For Customer	No	Numeric	This field is displayed after saving the record. It shows the value of the unpaid amount for the customer. You cannot edit this field.
Payment Holiday transaction type
Charge Fee	No	Lookup	This field displays the transaction fee applicable for this transaction type. See Transaction Fees for more details. You cannot edit this field.
Repayment Fee Percent	No	Lookup	This field displays the repayment fee percentage applicable for the contract. Depending on the ManualRepaymentFee Core Banking system parameter's value, the system may allow you to change the percentage. See Transaction Fees for more details.
Fee For Repayment	No	Lookup	This field displays the repayment fee value applicable for the contract. Depending on the ManualRepaymentFee Core Banking system parameter's value, the system may allow you to change the value. See Transaction Fees for more details.
Keep Contract Period	Yes	Bool	This field displays whether the system should keep the period of the contract (if the checkbox is selected) or recalculate it. You can modify this value.
Payment Holiday Period (Months)	Yes	Whole Number	Enter the number of months for which you request a break from the payments.
Payment Holiday Period Type	Yes	Option Set	Select the type of payment holiday to be applied for the contract. Possible values: Both - take a break from paying the principal and interest amounts of the installments. Principal - take a break from paying the principal amount of the installments.
Reason	Yes	Option Set	Select the reason for requesting the event. Possible values: Activity suspended Major force Financial restructuring.
Reschedule Overdues transaction type
Charge Fee	No	Lookup	This field displays the transaction fee applicable for this transaction type. See Transaction Fees for more details. You cannot edit this field.
Repayment Fee Percent	No	Lookup	This field displays the repayment fee percentage applicable for the contract. Depending on the ManualRepaymentFee Core Banking system parameter's value, the system may allow you to change the percentage. See Transaction Fees for more details.
Fee For Repayment	No	Lookup	This field displays the repayment fee value applicable for the contract. Depending on the ManualRepaymentFee Core Banking system parameter's value, the system may allow you to change the value. See Transaction Fees for more details.
Keep Contract Period	Yes	Bool	This field displays whether the system should keep the period of the contract (if the checkbox is selected) or recalculate it. You can modify this value.
Overdraft Payment transaction type
Remaining Principal At Date	Yes	Numeric	This field displays the remaining value of the principal at the current date. You can modify this value.
Overdraft Interest Rate	Yes	Numeric	This field displays the value of the interest rate applicable for overdraft payments for the contract. You can modify this value.
Repayment Principal Amount	Yes	Numeric	This field displays the principal amount to be repaid with this event. You can modify this value.
Interest Value	Yes	Numeric	This field displays the interest value applicable to the payment. You cannot edit this field.
Unpaid Amount On Contract	No	Numeric	This field is displayed after saving the record. It shows the value of the unpaid amount still on the contract. You cannot edit this field.
Unpaid Amount For Customer	No	Numeric	This field is displayed after saving the record. It shows the value of the unpaid amount for the customer. You cannot edit this field.
Deposit Liquidation transaction type
Interest to Recover	No	Numeric	This field displays the calculated interest to recover at the current date. You cannot edit this field.
Available Deposit Amount	No	Numeric	This field displays the available value in the deposit at the current date. You cannot edit this field.
Destination Account	Yes	Lookup	Select from the list the account where the available deposit amount has to be moved upon liquidation. The list contains the contract customer's current accounts.

6. Click the Save and Reload button at the top right corner of the page.
   If the event value meets the business requirements defined within Core Banking, the event is saved in Draft status and a transaction number is automatically generated for it. Otherwise, an error message appears. Change the values as instructed in the message and try saving the event again.
   
   

   While the event is in Draft status, all the event's fields except Transaction Type can be modified. The event value is not applied to the contract while the event is still in this status.
   

NOTE
Depending on the selected transaction type, new sections are displayed at the bottom of the page, containing the contract repayment schedule for the event and any generated notifications.
Click the Calculate/ Simulate repayment schedule / Simulate reschedule overdues buttons (the displayed button depends on the selected transaction type) to view the details of each installment.
For Reschedule Overdue transaction type, select from the list the overdue payment notifications that you wish to reschedule.



7. Approve the event by changing its status to Approved in the upper left corner of the Event page.

8. Confirm the change of status in the Confirmation window, clicking Yes. The event is now in Approved status.

   The event value is now applied and visible in the contract's Payments tab -> Transactions section.